Home > Parts & Accessories > Igniters and Dual Fuel Burners
Igniters and Dual Fuel Burners
Gun-type burners are set up to Central Boiler's specifications. Kits include everything needed to mount the burner on the furnace. Classic Dual Fuel Ready furnaces can accept a Beckett oil or Wayne LP burner that offers Wood Only, Clean Start, Backup and Full alternate fuel modes. E-Classic Ignition Ready furnaces can accept an LP gas igniter that can light and automatically relight the wood if necessary. (The IR igniter is not a full-time backup burner.) The Wayne LP and IR igniter burners can be converted to natural gas with available conversion kits.
Sort By:
Page of 1
Gasket, Burner - Oil Actuator - Classic dual fuel burners purchased after Dec 14, 2015 Retro Dual Fuel Kit, Gas Burner (without burner)
Gasket, Burner - Oil
Our price: $1.61
Gasket, Burner - Oil, Dual Fuel models. Replacement actuator for dual fuel burner purchased December 15th, 2015 and later. Only order part number 8200280 as the replacement if you have already installed one of these actuator kits: 2500179(CLDR) or 2500180(CL7260DR). Retro Dual Fuel Gas Kit for DF Ready Classic models (except CL 7260) with hinged side panel, Pallet Burner models and Hydro Fire models with 18-1/2" x 22-1/2" Dual Fuel cover. Kit does not include burner.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details.
Actuator Kit - Classic burners (excluding CL 7260) Retro Dual Fuel Kit, Gas Burner (without burner, pre-2005 CL7260 models) Retro Dual Fuel Kit with 13" Air Tube, Oil Burner (without burner, without actuator)
Kit to replace actuator part number 5742 with the current actuator used on dual ready burner kits (part numbers 6833 and 6834) for all Classic furnaces, excluding the CL 7260. Kit contains actuator, burner clamp, sensor switch assembly, 12-1/8" actuator shaft and closeoff plate. If kit 2500179 was previously purchased then the replacement actuator only would be part number 8200280. Retro Dual Fuel Gas Kit without burner. For pre-2005 CL 7260 models prior to serial number 35515.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details. 		Retro Dual Fuel Oil Kit with 13" Air Tube for DF Ready Classic models (except CL 7260) with hinged side panel, Pallet Burner models and Hydro Fire models with 18-1/2" x 22-1/2" Dual Fuel cover. Kit does not include burner or actuator.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details.
Actuator Kit - Classic 7260 burners Retro Dual Fuel Kit with 16" Air Tube, Oil Burner (without burner, for pre-2005 CL 7260 models) LP Upper Burner Kit, E-Classic 2300
Kit to replace actuator part number 5742 with the current actuator used on dual ready burner kits (part numbers 6843 and 6844) for the Classic 7260. Kit contains actuator, burner clamp, sensor switch assembly, 16-5/8" actuator shaft and closeoff plate. If kit 2500180 was previously purchased then the replacement actuator only would be part number 8200280.
 		Retro Dual Fuel Oil Kit with 16" Air Tube, without burner. For pre-2005 CL 7260 models prior to serial number 35515.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details. 		Optional LP upper gas burner for E-Classic 2300 Dual Fuel models.
Burner Adaptor Kit, CL 7260 Dual Fuel Oil Burner for Classic models (excluding CL7260) Dual Fuel Burner only, LP, 150,000 BTU
Burner Adaptor kit includes everything needed to mount a burner on the furnace. NOTE: Kit does not include burner. Application: For Classic 7260 outdoor wood furnace models.
 		Replacement dual fuel burner only (not kit) for Fuel Oil for Classic models, excluding CL7260.
 		Replacement dual fuel burner only, LP (not kit)
Retro Dual Fuel Kit with 13" Air Tube, Oil Burner (with burner) E-Classic 1400IR LP Gas Igniter E-Classic 1450IR LP Gas Igniter
Retro Dual Fuel Oil Kit with 13" Air Tube for DF Ready Classic models (except CL 7260) with hinged side panel, Pallet Burner models and Hydro Fire models with 18-1/2" x 22-1/2" Dual Fuel cover. Kit includes burner.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details. 		Optional LP gas igniter for E-Classic 1400IR.  Can light and automatically relight wood with the push of a button.  Can be converted to natural gas with available conversion kit. Optional LP gas igniter for E-Classic 1450IR.  Can light and automatically relight wood with the push of a button.  Can be converted to natural gas with available conversion kit.
E-Classic 2400IR LP Gas Igniter E-Classic 3200IR/3250IR LP Gas Igniter Beckett Burner kit, oil
Beckett Burner kit, oil
Our price: $1,205.88
Optional LP gas igniter for E-Classic 2400IR.  Can light and automatically relight wood with the push of a button.  Can be converted to natural gas with available conversion kit. Optional LP gas igniter for E-Classic 3200IR/3250IR.  Can light and automatically relight wood with the push of a button.  Can be converted to natural gas with available conversion kit. This Beckett oil burner kit is for all Classic outdoor wood furnace models (except the Classic 7260) with a serial number after 35515 and Hydrofire models after HF101414.  For models prior to these serial numbers, an available Retro Dual Fuel Kit is available.  Ask Dealer for details.
Retro Dual Fuel Kit with 16" Air Tube, Oil Burner (with burner, for pre-2005 CL 7260 models) Wayne Burner kit, LP, for Classic 7260 only Wayne Burner kit, LP
Wayne Burner kit, LP
Our price: $1,466.70
Retro Dual Fuel Oil Kit with 16" Air Tube, with burner. For pre-2005 CL 7260 models prior to serial number 35515.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details. 		This Wayne LP burner kit is only for Classic 7260 outdoor wood furnace models with a serial number after 35515 and Hydrofire models after HF101414.  For models prior to these serial numbers, an available Retro Dual Fuel Kit is available.  Ask Dealer for details.  A natural gas conversion kit comes with the kit. This Wayne LP burner kit is for all Classic outdoor wood furnace models (except the Classic 7260) with a serial number after 35515 and Hydrofire models after HF101414.  For models prior to these serial numbers, an available Retro Dual Fuel Kit is available.  Ask Dealer for details.  A natural gas conversion kit comes with the kit.
Retro Dual Fuel Kit, Gas Burner (with burner, pre-2005 CL7260 models)
Retro Dual Fuel Gas Kit with burner. For pre-2005 CL 7260 models prior to serial number 35515.

NOTE: For furnaces with a model number ending in L, O or R, please call Dealer for part number information.

NOTE: Cutting and welding may be required on some kits. For Pallet Burner, measure the burner tube to determine which kit is needed. Ask Dealer for details.